Sirrin tsana na Plush vinyl

2025-04-01

Tsarin ƙera: Tsarin ƙera vinyl tsari ne na ƙera thermoplastic. Da farko, ana saka kayan filastik na ruwa PVC (polyvinyl chloride) a cikin ramin mold, kuma ana dumama filastik ɗin kuma yana tauri a cikin mold. Bayan sanyaya, ƙera na iya samun sassan ethylene masu siffofi daban-daban. Waɗannan sassan suna da laushi a cikin laushi, suna da santsi a saman kuma suna da ɗan sassauci. Sau da yawa ana amfani da su don yin sassa dalla-dalla kamar kai, hannuwa, da ƙafa na 'yan tsana, kuma suna iya gabatar da siffofi masu rikitarwa da bayyanannun abubuwa masu kyau. Ga ɓangaren ƙera, ana zaɓar yadudduka masu inganci. Ta hanyar yankewa, dinki da sauran hanyoyin, ana naɗe kayan laushi kamar auduga kuma ana cika su, kuma ana haɗa su da sassan da aka yi da ethylene don ba wa 'yar tsana ta taɓawa mai laushi da kuma jin daɗin gani.inquiry@gaopengtoy.com

Tsarin ƙirƙira da ƙira: Abokin ciniki da farko yana tantance jigon 'yar tsana, kamar haruffan anime, hotunan dabbobin gida ko asalin IP. Sannan, ƙwararrun masu zane-zane suna zana zane-zanen ƙira na 2D bisa ga bayanin abokin ciniki, a hankali suna bayyana cikakken tsarin 'yar tsana, siffofin fuska, motsin jiki da daidaita launi, sannan su sadarwa da gyara akai-akai har sai abokin ciniki ya gamsu.
2. Samar da mold: Bisa ga zane-zanen da aka tabbatar, ana samar da molds masu inganci. Da farko, ana gina samfurin 3D na dog ta amfani da software na ƙirar 3D, sannan ana samar da samfurin mold ta hanyar bugawa ta 3D ko injin CNC. Bayan an sarrafa shi da kyau kamar niƙa da gogewa, ana sake ƙirƙirar mold ɗin silicone ko mold ɗin ƙarfe. Ingancin mold ɗin yana shafar tasirin smolder ɗin kai tsaye.

3. Gina Vinyl: Zuba kayan da aka shirya na PVC a cikin mold ɗin sannan a dumama shi a cikin tanda. Dole ne a daidaita zafin jiki da lokacin da aka ɗauka daidai lokacin dumama don tabbatar da cewa an dumama filastik daidai kuma ya warke gaba ɗaya. Bayan gyaggyara, ana yin gyaggyara, kuma ana gyara sassan Vinyl kuma ana cire su daga ciki don cire lahani, wanda hakan ke sa saman ya yi santsi kuma siffar ta zama daidai.

ODM/OEM

4. Samar da auduga da kuma cikawa: Yi ɓangaren ƙarau kamar yadda aka tsara. Cika auduga, audugar PP da sauran kayan cikawa daidai gwargwado a cikin harsashi mai laushi don siffanta dukkan jiki da kuma tabbatar da taɓawa mai laushi da daɗi. Lokacin cikawa, kula da sarrafa adadin cikawa don guje wa cikawa da tauri ko kuma ya yi ƙasa da haka.
5. Haɗa sassan: Haɗa sassan vinyl ɗin da aka gama da jikin roba daidai kuma a gyara su da ɗinki ko manne. Sanya kayan ado kamar idanu, hanci, baki, da sauransu, don tabbatar da cewa suna da ƙarfi kuma suna cikin matsayi mai kyau don ƙara haske ga 'yar tsana.

ODM/OEM